The Bicycle; Preparing The Bicycle; Adjust The Handlebar - Youin BK2026B Manuel De L'utilisateur

Instructions for use
go out one by one. By starting to pedal, the control unit is activated and allows the
motor to help the pedal stroke.
The Shimano 7-speed gearbox supplied allows you to further adjust the pedaling
ratio according to your needs. Pedaling assistance stops in the event of braking or if
you stop pedaling (for example, downhill). To reactivate it, simply resume pedaling.
During braking please do not pedal.
The Km range indicated (about 40 km) is to be understood with the normal use of a
bicycle with city flat urban route. In case of steep climbs and / or transport of heavy
objects, autonomy could significantly decrease.
Since, as already specified, a bicycle is not expected to add an accelerator. Any
decision by the user to introduce it will immediately invalidate the bicycle warranty
and terminate the bicycle's nature.
CAUTION
When you ride an electric bike with assisted pedal your speed is sensitively higher
than that of a "normal bicycle". Pay more attention and consider adequate braking
spaces.

THE BICYCLE

Preparing the bicycle

The bicycle is supplied open with the saddle
mounted and the handlebar turned (Pic. 4).
You need to assemble the pedals.
The battery is not connected. To insert
and connect it correctly yes Refer to the
paragraph "positioning" on page. 13
First remove the protections and straighten
and adjust the handlebar.

Adjust the handlebar

To adjust the handlebar, use the supplied
hex key: unlock the expander located in the
handlebar column. Put the handlebar at the
desired height and direction.
If necessary, you can also adjust the angle
of the handlebar bend; the bend is inserted
into the stem and taking care to center the
knurling in the center of the stem, adjust to
the desired angle. Fix the fold by tightening
the screws and the tightening bolts (Pic. 6).
8
YOU-RIDE LOS ANGELES
(Pic. 4)
Expander (26A)
(Pic. 5)
(Pic. 6)
Correct assembly of the handlebar
Handlebar clamp
screws
Stop
Knurling to be
centered in the stem
Handlebar fold