Adjust The Brakes; Adjust The Gearbox - Youin BK2026B Manuel De L'utilisateur

Instructions for use
On the seat post there is the notch with stop
limit. Make sure that the clamp nuts that regulate
the position of the saddle are well locked (Pic. 8).
The bicycle is equipped with a quick-lock seat
post lock; to adjust the saddle open the lock,
raise or lower the seat post to the desired height
making sure that the stop limit is not visible,
tighten the quick release mechanism and make
sure that the lever is tight (Pic. 9).

Adjust the brakes

The bicycle is equipped with V-BRAKE brakes
(Pic. 10).
To adjust the V-Brake brakes it is necessary to
maintain a distance of about 2mm between the
brake pads and the rim. The two pads must
simultaneously touch the rim when braking
and without touching the tire. The adjustment
must be made by acting on the adjusting screws
on the brakes. In case of doubts or perception
of any anomaly during use, have the bicycle
checked by a mechanic.

Adjust the gearbox

If the chain has difficulty climbing on
the large rear chainring (shifter on
the handlebar turned to maximum),
unscrew screw B slightly, avoiding
that the chain goes beyond the last
chainring.
If the chain descends with difficulty
on the small rear chainring, slightly
unscrew screw A to align the derailleur
unit on the small chainring (Photo 11).
In case of doubts or perception of any
anomaly during use, have the bicycle
checked by a mechanic.
10
YOU-RIDE LOS ANGELES
(Pic. 8)
Clamp
Stop
(Pic. 9)
Lock
(Pic. 10)
Seat post
8 cm
(Pic. 11)