Hailo M80 Mode D'emploi page 22

5. Assembly / operation
5.4 Setting up and using the
single-hinge joint ladder
A) Use as a stepladder:
The ladder's feet [F] must stand securely and firmly
on the ground.
The hinge joints [C] and locking clamps [D] must
be locked.
B) Use as a single ladder:
The ladder must stand securely on the ground and be
leaning against a flat and secure surface.
The hinge joints [C] and locking clamps [D] must
be locked.
Secure single ladders before using, e.g. tie down to
ensure stability.
C) Storage:
The single-hinge joint ladder's individual elements
can be folded together and pushed in for storage
and transport.
The hinge joints [C] and locking clamps [D] must
be locked.
22
5.4
Overview of the
ladder rungs that must not
be used as a support surface.