Ac Current Measurement - HT HT64 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4.4.9. AC Current measurement

Maximum input AC current is 10A (input 10A) or 600mA (input mAA). Do
not measure currents exceeding the limits given in this manual. Exceeding
voltage limits could result in electrical shocks to the user and damage to the
instrument.
Fig. 30: Use of the instrument for AC current measurement
1. Cut off power supply from the circuit to be measured.
2. Select positions A
3. Press the F2 (MODE) key to select
4. Insert the red cable into input terminal 10A or into input terminal mAA and the black
cable into input terminal COM.
5. Connect the red lead and the black lead in series to the circuit whose current you want
to measure (see Fig. 30).
6. Supply the circuit to be measured. The display shows the value of current.
7. If the display shows the message
reached.
8. To use the HOLD, RANGE and REL functions, see § 4.2.
9. To use the internal functions, see § 4.3.
, mA
or 10A.
AC
"
"
O.L
"
EN - 25
CAUTION
measurement.
, the maximum measurable value has been
"
HT64

Publicité

Table des Matières
loading

Table des Matières