Velleman MVR5 Mode D'emploi page 8

2. Press to select Memory Medium and press [M] to confirm.
The options are: Internal memory and microSD card.
3. Press to select the memory you want and press [M] to
confirm.
4. If you select the microSD card option, the icon SD will be
displayed on the screen.
Set the time and date
1. Access the System Settings (see above).
2. Press to select Time Settings and press [M] to confirm.
3. Press to select the date or time and press [M] to confirm.
4. Press or
Press ►║ to go to the next digit.
5.
6. When done, press [M] to confirm
Set the recording format
1. Access the System Settings (see above).
2. Press to select Set Audio record mode and press [M] to
confirm.
The recording formats are: AMR, WAV, MP3 and AAC.
3. Press to select a recording format and press [M] to confirm.
Note: The default recording format for this device is WAV.
Set the sampling rate
1. Access the System Settings (see above).
2. Press or
3. Select from 8K, 16K, 24K, 32K and 48K
4. Press [M] to confirm.
Set the screensaver delay
1. Access the System Settings (see above).
2. Press to select Screen Save Timer and press [M] to confirm.
3. Press or
4. Press [M] to confirm.
Turn the LED recording indicator on or off
1. Access the System Settings (see above).
2. Press to select the LED option.
3. Press [M] to change the setting.
When Off is selected, the LED indicator will remain off during
audio/video recording.
V. 01 – 24/01/2013
MVR5
to adjust the digit.
to select Sampling rate and press [M] to confirm.
to select the delay: off or 10-20-30 or 60 sec.
8 ©Velleman nv