Tool Holder, Attachments T 18+3 With Fastfix - Festool T18+3 Notice D'utilisation D'origine

English
11 Tool holder, attachments
T 18+3 with FastFix
WARNING
Risk of injury
► Remove the battery pack from the power
tool before performing any work on the
power tool.
CAUTION
Risk of injury from hot and sharp insertion
tool
► Do not use any blunt or faulty insertion
tools.
► Wear protective gloves when handling an
insertion tool.
11.1 CENTROTEC tool chuck [4]
Quick change of tools with CENTROTEC shaft
Only clamp CENTROTEC tools in CEN­
TROTEC tool chucks.
click
2
1
click
11.2 Chuck [5]
For clamping drill bits and bits with max. shaft
diameter of 1/2" (13 mm).
WARNING! Clamp the tool centrally in the
chuck.
14
3
4
WH-CE
CENTROTEC
1
11.3 Angle attachment [6]
Drilling and screwdriving at right angles to the
power tool (available as an accessory depend­
ing on the model).
3
11.4 Eccentric adapter [7]
®
Screwdriving close to edges with bits according
4
to ISO 1173 (available as an accessory depend­
ing on the model).
2
3
4
2
1
AN-UNI
BF-FX
5
6