Safety Notices; Warnings - CLOROX Total 360 ProPack Manuel De L'utilisateur

SAFETY NOTICES

This manual contains information that is important for you to know
and understand before operating the Clorox® Total 360® ProPack
Electrostatic Sprayer. This information relates to protecting your
safety and ensures product reliability and performance. It is the
owner's responsibility to ensure that all who operate this equipment
read this manual.

WARNINGS

To help you recognize this information we use the warning symbols
below. Please read the manual carefully, and pay special attention
to the symbols and warning labels. Warning labels indicate a
potentially hazardous situation which, if not avoided, could result
in death or serious injury.
WARNINGS
• Read and fully understand the Clorox® Total 360® ProPack
Electrostatic Sprayer Operator's Manual prior to using the
electrostatic sprayer.
• Read and fully understand Clorox-approved product labels
prior to using any liquid product with the Clorox® Total 360®
ProPack Electrostatic Sprayer, and follow safe-use instructions
such as recommend personal protective equipment (PPE).
• Clorox® Total 360® ProPack Electrostatic Sprayers are for both
indoor and outdoor commercial use. Bystanders and pets
should not be in the area during application.
• Clorox® Total 360® ProPack Electrostatic Sprayers are intended
for indoor storage only.
• Clorox® Total 360® ProPack Electrostatic Sprayers should not
be operated below 40°F (4.5°C).
• Clorox® Total 360® ProPack Electrostatic Sprayers should
never be used in an area containing volatile chemicals. Nor
should they be used in hazardous environments nor any area
containing volatile or explosive levels of gas, vapor or airborne
particles.
• Clorox® Total 360® ProPack Electrostatic Sprayers should never
be used by untrained personnel.
WARNINGS
PRESSURIZED EQUIPMENT HAZARD
Fluid from equipment that leaks or ruptures from a component
can splash in the eyes or on skin, causing serious injury. In order
to help prevent a leak or rupture:
• Check hoses, tubes and couplings
daily. Replace worn or damaged parts
immediately.
WARNINGS
PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them to fail,
which can lead to serious injury or property damage. In order to
help prevent against degradation:
• Use only compatible water-based solvents
to clean plastic structural pressure
containing parts.
• See technical data in this and all other
equipment instruction manuals. Read fluid
and solvent manufacturer's Safety Data
Sheets (SDS) and recommendations prior
to use.
WARNINGS
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in work
areas can ignite or explode. To help prevent fire, explosion
and electric shock:
• Electrostatic equipment must be used
only by trained, qualified personnel who
understand the requirements of this manual.
• Stop operation immediately if static sparking
occurs or you feel shock. Do not use
equipment until you identify and correct
the problem.
• Use and clean equipment only in well-
ventilated area.
• Never spray a flammable chemical
(with a flashpoint less than 140°F [60°C]).
• Do not plug or unplug power cords or
turn lights on or off when flammable
fumes are present.
• Keep spray area free of debris, including
solvents, rags, gasoline or any flammable
chemicals.
• Keep a working fire extinguisher in the
work area.
EN | 3