Maintenance; Change The Circular Saw Blade - HOLZMANN MASCHINEN MKS 355 Mode D'emploi

14.2

Maintenance

14.2.1

Change the circular saw blade


Unscrew the wing screw on the protective cover.
 The lateral protective cover fold back.
 Rotate the saw blade until the button for the blade lock (3) can
be pressed.

The blade guard cover lock pull and drag them to the other side
facing up. -see next image

Push the blade lock (3) and using the supplied Allen
key (8mm) unscrew counterclockwise.
CAUTION: Wear protective gloves!
 remove the flange and the saw blade.
When installing these steps in reverse run. Pay attention, however, to
the running direction of the saw blade!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
MAINTENANCE
28
MKS 355