Safety; Intended Use; Working Conditions; Dimensions Of Workpieces - HOLZMANN MASCHINEN MKS 355 Mode D'emploi

11 SAFETY

11.1

Intended Use

The machine only in technically perfect condition, for their intended safety, and use risk-
conscious! Faults which may impair safety, must be rectified immediately!
It is generally forbidden to modify safety equipment of the machine or to make ineffective!
The metal cutting saw MKS 355 is exclusively intended for cutting tubes, flat and round material
made of steel, aluminum and nonferrous metals.
For other or additional use and resulting damage or injuries accepts
HOLZMANN MASCHINEN
11.1.1

Working conditions

The machine is designed for the work under the following conditions:
humidity
temperature
The machine is not intended for outdoor use.
The machine is not intended for use in potentially hazardous conditions.
11.1.2

Dimensions of workpieces

The size of the workpieces (at 90 ° adjustment) must not exceed 90x150mm!
11.2

Prohibited use


The machine is not intended for use under explosive conditions.

The operation of the machine under conditions outside the limits listed above is not permit-
ted.

The operation of the machine without the protection provided devices is not permitted.

the dismantling of protective devices is prohibited.

Operating the machine on uneven and / or slippery ground is strictly forbidden!

It is not permitted the operation of the machine with materials that are not expressly indi-
cated in this manual.
It is not permitted the use of tools that do not comply with the standard ЕN847-1.


Inadmissible is also all manner of operation, the non-compliant in one or more points with
the safety regulations and other operating and maintenance instructions in this manual.
For other or additional use and resulting damage or injuries accepts HOLZMANN-
MASCHINEN no responsibility or warranty.
HOLZMANN MASCHINEN GmbH
no responsibility or warranty.
www.holzmann-maschinen.at
max. 90%
von +1°С bis +40°С
SAFETY
21
MKS 355