Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
3.7 When finished
Emptying
Cleaning
Clean device thoroughly after each use: To
remove coarse dirt and debris, use standard
household cleaners and rinse with clear water
several times.
Important: The wiper system needs to be
cleaned carefully with clear water after each
use.
- Put bucket under the red drain plug at the
front face and remove the plug.
- Drain off the water.
- Lift the device at the other side and tip it
slightly to remove any remaining water.
4. Service
4.1 Maintenance
If the device is used as intended and cleaned carefully, it will be largely maintenance-free.
4.2 Marking of the device
Every dip tank has a device badge with
Vitrulan Textile Glass GmbH
the device number on the outside. In
95509 Marktschorgast I Germany
case of complaints, please provide
device number.
Typ: Aqua Quick
Nummer: 1234
Baujahr: 03/2012
4.3 Warranty conditions
Unless otherwise agreed in the order, we extend a warranty for 24 months after delivery. The warranty does not include damages resul-
ting from any improper use of the device.
4.4 Procedure in case of damage or defect
In order to process any cases of damage or defect, we require the following information from you:
- Device number from device badge
- Copy of delivery docket / invoice
- Type of fault / required spare part according to spare parts list
In case of damage, please contact:
Vitrulan Textile Glass GmbH
Bernecker Str. 8
95509 Marktschorgast
Germany
A company of the Vitrulan Group
T + 49 (0) 9227 77 0
F + 49 (0) 9227 77 700
14
Disassembly
To disassemble the device, unplug the legs and
place them inside the dip tank for transport.
Close the lid and lock it with latch.
Notes
15
Publicité
Table des Matières
