After The Work; Service; Maintenance; Marking Of The Device - Vitrulan AQUA QUICK I Mode D'emploi

GB

3.7 After the work

Emptying
- Unscrew red drain plug on the front face.
- Drain water into a previously provided
bucket.
- To completely drain the container, the
steep bath needs to be lifted slightly on the
opposite side.

4. Service

4.1 Maintenance

If the device is used as intended and cleaned carefully, it will be largely maintenance-free.

4.2 Marking of the device

Vitrulan Textile Glass GmbH
95509 Marktschorgast I Germany
Typ: Aqua Quick
Nummer: 1234
Baujahr: 03/2012

4.3 Warranty conditions

Unless there are agreements to the contrary in the order, we extend a warranty for 24 months after delivery. The warranty does not
include damages resulting from any improper use of the device.

4.4 Procedure in case of damage

To be able to process any potential cases in which a damage occurred, we need the following information from you:
- Device number from device sticker
- Copy of delivery docket / invoice
- Type of fault / required spare part according to spare parts list
In case of damage, please contact:
Vitrulan Textile Glass GmbH
Bernecker Str. 8
95509 Marktschorgast
Germany
A company within the Vitrulan Group
T + 49 (0) 9227 77 0
F + 49 (0) 9227 77 700
14
Cleaning
Clean device thoroughly after each use: Also,
coarse debris needs to be removed using
common household cleaning products and
flushed multiple times with clear water.
Important: The stripper needs to be cleaned
carefully with clear water after each use.
Every steep bath has a device badge
with the device number on the outside.
In case of complaints, the devices num-
ber always needs to be provided.
Disassembly
When disassembling the device, the legs are
pulled out of the lateral holders. The tubes
of the frame are placed in the steep bath for
transport. The folded lid is fixed in place using
locking hooks.