Basic Operation; Before You Turn On The Receiver; Selecting The Component - Sony STR-LSA1 Mode D'emploi

Basic
Operation
This chapter describes basic receiver
operation.
8 GB
Before You Turn On the
Receiver
Connecting the AC power cord
Before connecting the AC power cord of this receiver to a
wall outlet:
• Connect the speakers to the receiver (see page 7).
Connect the AC power cords of your audio components to
a wall outlet.
Note on the VOLUME control
To avoid damaging your speakers, be sure to rotate the
VOLUME control counterclockwise immediately after you
turn on the receiver.

Selecting the Component

Do the procedure below to select the component (program
source). After connecting all of your components to the
receiver, we recommend that you do this to verify that the
connections were made correctly.
?/1
?/1
Jog dial
1
Press ?/1 to turn on the receiver.
2
Press JOG MENU repeatedly until a component
name appears in the display. Then rotate the jog
dial (or press FUNCTION +/– on the remote
repeatedly) to select one of the components
(program sources) that you have connected (e.g.,
an MD deck or CD player).
3
Turn on the component and start playing it.
4
Rotate VOLUME clockwise (or press VOL + on the
remote repeatedly) to turn up the volume.
VOLUME
i
I
JOG MENU