Start-Up - Villeroy & Boch Emotion Control Mode D'emploi

2

Start-up

• The Emotion Control and the receiver do not need to be taught. They are already both set to
radio channel 1 at the factory and are ready for operation.
Only in specialist cases is it necessary to change the radio channels on the receiver and the Emotion Control.
If for example you have two Emotion Control and two receivers (A and B) located in the same room but in different
places. Provided both Emotion Control are set to channel 1, the two Emotion Control will also talk to both systems.
If you want to dim lighting group A but not lighting group B, then the Emotion Control and the receiver for lighting
group A must communicate on a different radio channel than the Emotion Control and receiver of lighting group B.
There are four different radio channels available.
Lighting group A
e.g. radio channel 1
Emotion Control and receiver
are set to the same radio channel
(e.g. radio channel 1).
10
Emotion Control and receiver
are set to the same radio channel
(e.g. radio channel 3).
1
2
3
4
www.villeroy-boch.com // V 1.0 // 21.02.2017 // Emotion Control DE/EN/FR/NL/RU DE/EN/FR/NL/RU
Lighting group B
e.g. radio channel 3
1
2
3
4