Programming Brew Size; Programming On/Off Features - Keurig Hot COMMERCIALE Série Manuel D'utilisation

P12 20162461 T5274_K150P_UCG_FINAL.pdf 4C(CMYK) ZB2319 2016-11-02 Size:8.5X5.5in
SECTION 2 Menu Controls & Indicators
Programming Your Brew Size
All brew sizes are enabled in the default setting. If you want to disable any
brew size, just press on the appropriate icon(s). Please follow instructions
outlined below.
From the Menu Mode, press
1.
17
fig.
"SET BREW SIZE(S)."
2. The LCD Screen will display all enabled brew
3
sizes. To disable a brew size press the icon.
OK
The check mark will change to an "X"
4 Oz.
indicating that the brew size is disabled
3 3
(fig. 17). To enable a disabled size, press
6 Oz. 8 Oz. it again.
3
3. Once you have selected your desired brew
10 Oz. 12 Oz. size(s), press "OK." The brew size(s) are
now programmed.
NOTE: You can not delete all brew sizes.
To enable a brew size you have already
disabled, just press its icon and then press
"OK." The 8 oz. setting is the default brew
size if all sizes have been disabled.

Programming on/off Features

The brewer provides three modes so that you can enjoy gourmet coffee, tea,
hot cocoa, or other beverage on your own schedule.
1. Leave the brewer "ON" all the time.
18
fig.
brewer can be left on all the time so that it is
always ready to brew a fresh cup of gourmet
coffee, tea, hot cocoa, or other beverage. To
Auto OFF
turn the brewer off at any time, simply press
Auto Off 2 hours
and release the Power Switch. Press and
After Last Brew
release the Power Switch again to restore
ON OFF
power to the brewer. You will have to wait for
the water to heat up before the brewer is
ready to brew.
OK
Program the brewer to "AUTO OFF." The
2.
brewer can be programed to automatically
turn off 2 hours after the last brew (fig. 18).
a. From the Menu Mode, press "AUTO OFF."
The LCD Screen will now display the
"AUTO OFF" programming option.
b. To enable the "AUTO OFF" feature, press
"ON." "ENABLED" will appear on the screen
and press "OK." To disable the "AUTO OFF"
feature, press "OFF." "DISABLED" will appear
on the screen and press "OK."
Program the brewer for a specific On/Off
3.
Time.
NOTE: To use this programming feature, the clock must be set to the
correct time.
12
The