Operating And Indicator Panel Freezer; Temperature Setting Buttons - AEG SANTO Z 9 18 40-4 i Notice D'utilisation

Operating and indicator panel freezer

°C
ON/OFF
H. Mains pilot indicator (green)
I. Freezer button ON/OFF
J. Temperature setting button (for warmer temperatures)
K. Temperature display
L. Temperature setting button (for colder temperatures)
M. FROSTMATIC function "on" indicator (yellow)
N. FROSTMATIC button
O. Alarm reset light
P. Alarm reset button

Temperature setting buttons

The temperature is adjusted using the „J" and „L" buttons. These buttons are
connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, „J" or „L").
• Each time one of the two buttons is pressed again the DESIRED temperatu-
re is adjusted by 1 °C. The DESIRED temperature must be reached within 24
hours.
If neither button is pressed, the temperature display automatically switches
back after a short period (approx. 5 sec.) to the display of the ACTUAL tem-
perature.
20
TURBO
°C
ON/OFF
H
I
°C °C
J K L
ALARM OFF
M O P
N