General Safety Instructions - Dometic PLB40 Notice D'utilisation

General safety instructions

2 General safety instructions
The manufacturer accepts no liability for damage in the following cases:
•
Damage to the product resulting from mechanical influences and incorrect
connection voltage
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
The declaration of conformity can be requested from the manufacturer (contact infor-
mation on the back).
Note the following basic safety information when using electrical devices to protect
against:
•
Electric shock
•
Fire hazards
•
Injury
2.1 General safety
!
WARNING! INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELEC-
TRIC SHOCK, OR INJURY TO PERSONS.
•
Only use the device as intended.
•
Disconnect the device from the mains
– Before cleaning and maintenance
– After use
– Before changing a fuse
•
To reduce risk of damage to the electric plug and cord, pull the plug
rather than the cord when disconnecting the device.
•
Do not use a device that is damaged or modified. Damaged or modi-
fied devices may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not operate the device with a damaged cord or plug, or a dam-
aged output cable.
•
Do not disassemble the device, take it to a qualified service person
when service or repair is required. Incorrect reassembly may result in a
risk of fire or electric shock.
•
To reduce the risk of electric shock, unplug the device from the outlet
before attempting any instructed servicing.
•
Do not expose to liquid, vapor, rain, sleet, snow or the like.
6
PLB40
EN