G Operating Instruction; Getting Started - THOMSON WEAR7208 Mode D'emploi

G Operating instruction

Controls and Displays
1. Earphones
2 Microphone
3 Status LEDs
4 Volume +, jump forward one title
5 On/off button, voice control, multifunction button (MF)
6 Volume -, jump backward one title
7 Charging socket
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• 1x Bluetooth stereo headset "WEAR 7208"
®
• 1x USB/Micro-USB charging cable
• 3 pairs of ear cushions (sizes S, M, L)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
• Do not drop the product and do not expose it to any major
shocks.
• Do not operate the product outside the power limits given in
the specifications.
• Do not open the device or continue to operate it if it becomes
damaged.
• Since the battery is integrated and cannot be removed, you
will need to dispose of the product as a whole. Do this in
compliance with the legal requirements.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
2
Warning - Battery
• Only use suitable charging devices or USB connections
for charging.
• As a rule, do not charge devices or USB connections that
are defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• When stored over a long period of time, batteries should
be charged regularly (at least every three months).
Warning - High volumes
• Using this product limits your perception of ambient
noise. For this reason, do not operate any vehicles or
machines while using this product.
• Always keep the volume at a reasonable level. Loud
volumes, even over short periods, can cause hearing loss.

4. Getting Started

• The headset is equipped with a rechargeable battery. The
battery must be fully charged before using the device for
the first time.
• Ensure that the headset is switched off before charging it.
• Begin charging by connecting the included USB charging
cable to the charging socket (7) as well as to the USB
connection of a PC/laptop.
• Alternatively, you can charge the headset using a suitable
USB charger. Please refer to the operating instructions for the
USB charger used.
• The display lights up constantly in red during the charging
process.
• It takes around 2-3 hours until the battery is completely
charged.
• Once the charging process is complete, the red light of the
LED (3) turns to blue light.
• Disconnect all cable and mains connections after use.
5. Operation
Switching the headset off/on
• Press the MF button (5) until a voice says "Power ON" and
the blue LED flashes.
• To switch it off, press and hold the MF button (5) until a voice
says "Power OFF" and the red LED flashes.