Technical Information; Installation Considerations - Hansgrohe C 04221 0 Série Instructions De Montage / Mode D'emploi / Garantie

Table des Matières

Publicité

04226xx0
04231xx0
2
04221xx0
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate @ 44 PSI
*Please know and follow all applicable local plumbing codes
when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thorough-
ly before beginning installation. Make sure
that you have all tools and supplies needed
to complete the installation.
• This trim is for use with iBox Universal Plus
model 01850181 (not included).
• To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
8.0 GPM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E 04226 0 sérieS 04231 0 série

Table des Matières