Box Contents; Identification Of Parts; Assembly - Texas Handy Sweep 600 Manuel D'utilisation

Box Contents

Figure 1:
a. Machine with upper handle bar mounted
b. Swing handle
c. Mounting hardware for handle bar
d. Engine Manual and User's Manual

Identification of parts

Figure 2
a. Brush
b. Support wheel for brush / adjustment of sweeping height
c. Wheels
d. Lower part of handle bar
e. Mounting hardware for upper part of handle bar Adjustment of upper handle bar
f. Upper handle bar
g. Clutch handle – Activating brush
h. Clutch handle – Forward
i. Clutch handle – Reverse
j. Throttle
k. Swing handle
l. Motor (may vary from picture)
m. Belt guard

Assembly

The sweeper is almost ready assembled from the factory. Only a few items remain to be
assembled:
1. Mount upper part of handle bar to lower part with the enclosed bolt kit.
See Figure 3 and 4
Explanation, Figure 4:
a. Lower part of handle bar
b. Upper handle bar
2. Mount swing handle with enclosed bolt and nut.
Figure 2, k.
3. Check the tire pressure on both wheels before use. Correct tire pressure is
30 psi/2 bar. Figure 5.
Use of machine with too low tire pressure, can damage the tires!
12