Vess A2200 Guide De Démarrage Rapide page 9

Figure 5: Vess A2200/A2200s with rail brackets and handles attached
Follow the mounting rail instructions to attach the Rail brackets on each side of the en-closure, and the
handles on the front.
To install the Vess A2200/A2200s into a rack with the supplied mounting rails:
1. Check the fit of the mounting rails in your rack system.
2. Adjust the length of the mounting rails as needed.
Figure 6: Installing the rails onto the rack
left side rail viewed from front
Please refer to the Quick Installation Guide included with the mounting rails for
more detailed rack installation instructions.
Vess A2200 Quick Installation Guide
Note
right side rail viewed from front
7