Vess A2200 Guide De Démarrage Rapide page 10

PROMISE Technology
Figure 7: Place enclosure into the mounting rails
Mounting
rail
3. Insert the rail brackets attached to the Vess enclosure into the rails.

At least two persons are required to safely lift the system.

Lift the enclosure itself. Do not lift the system by its brackets or handles.
Figure 8: System installed in rack viewed from rear
4. Secure the enclosure to the rack.

The unit attaches to the rack posts using the included screws and flange nuts.

Use the attaching screws and flange nuts that came with the Vess A2200/A2200s enclosure.
Support
Rail bracket
8