Switching The Device On - Hama 00054844 Notice D'utilisation

Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device
yourself. Leave any service work to qualified experts.
4. Before starting
Note
A detailed description of the UNDOK app and
the full scope of functions can be found in our
UNDOK guide at:
www.hama.com - > 00054844, 00054851 - > Downloads
Setting up a network connection
4.1 WLAN (wireless network)
• Ensure that the router is switched on, is functioning
correctly and that there is a connection to the internet.
• Activate the WLAN function of your router.
• Follow your router's operating instructions as regards the
correct functioning of the WLAN connection.
• Then proceed directly as described under section 5
‚Getting started'.
5. Getting started

5.1 Switching the device on

• Connect the power cable to a properly installed power
socket.
Warning
• Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the power supply using
the on/off switch – if this is not available, unplug the
power cord from the socket.
Notes on use
• When a selection is to be made between different
buttons (such as YES or NO), the selected button is
highlighted.
• In menus offering a variety of different options
(such as Equalizer, Update, and so on), the currently
selected option is marked [ ü ].
• Wait until the radio initialisation procedure has finished.
• Press the [POWER] button to switch the radio on.
Note – Turning on for the rst time
• The setup wizard starts up automatically when you
switch the device on for the first time.
• The setup wizard is in English.
• You can skip the wizard and open it again later.
5.2 Language and setup wizard
The first time the system starts the radio uses English. To
change this, proceed as follows:
Press [MENU] > System settings > Language > Select
language
Confirm your selection by pressing the [ENTER] or [OK]
button.
Note
• You can choose from the following languages:
English, German, Danish, Dutch, Finnish, French,
Italian, Norwegian, Polish, Portuguese, Spanish,
Swedish,Turkish, Czech and Slovak.
3