Care & Maintenance; Cleaning The Air Intake Fi Lter; Cleaning The Interior And Exterior - Danby DDY060WDB Manuel Du Propriétaire

CARE & MAINTENANCE
Cleaning the lint fi lter
Unplug the power cord prior to any cleaning. The
lint fi lter must be in place when the unit is running
and should be cleaned before and after every load.
1. Removing the lint fi lter.
• Remove the fi lter by gently pulling outwards on
the center of the exhaust vent shroud.
• The fi lter has three parts: exhaust vent shroud,
lint fi lter and exhaust fi lter.
2. Cleaning the lint fi lter.
• Separate the three pieces of the fi lter.
• Remove lint with a soft brush or vacuum cleaner.
3. Replacing the lint fi lter.
• After cleaning, reassemble the exhaust vent
shroud, the lint fi lter and the exhaust fi lter.
• Ensure the fi lter assembly is fi rmly installed in the
unit.
Cleaning the air intake fi lter
The air intake fi lter should be cleaned once a
month. Remove the air intake fi lter by holding the
upper and lower ends and pulling outward. Remove
the fi lter and clean it with a soft brush. Reassemble
and install in the unit.

Cleaning the interior and exterior

• Do not immerse any part of the unit in water.
• Do not use thinner, gasoline or alcohol on or
near the unit as the residue and fumes can cause
a fi re.
• Do not use any type of spray cleaner on the
interior of the unit. If the drum becomes stained,
clean with a damp cloth.
• Remove any residue before drying the next load.
• Clean cabinet with mild soap and water. Do not
use harsh or abrasive cleaners.
10