Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
WALL MOUNTING INSTRUCTIONS
1. Install the exhaust connector on the back of the
unit. The exhaust connector can be aimed in any
direction that is convenient for your installation.
2. Using four 12mm screws, attach the plastic
spacers to the rear of the unit. These spacers will
minimize vibration and noise during operation.
3. With assistance, mount the dryer on the wall
bracket.
12 mm screws
Wall bracket mounting points
7
Exhaust connector
Spacers
Publicité
Table des Matières
