Danby DDY060WDB Manuel Du Propriétaire page 6

INSTALLATION INSTRUCTIONS
LOCATION
Before you install the dryer, select a location with
the following characteristics:
• A hard, level surface. Do not place the dryer on
carpeted fl oor.
• Away from direct sunlight. Direct sunlight may
affect the acrylic coating, plastic and electrical
components.
• Adequate ventilation. Ventilation openings must
not be obstructed.
• Away from sources of heat such as fi replaces or
stoves.
• Make sure that the dryer does not stand on its
power cord.
• There must be at least 10 cm (4 inches) of space
between the the dryer and any adjacent wall.
WALL MOUNTING KIT
A wall mounting kit is included with the unit so that
the unit can be secured to the wall if necessary.
We recommend using two people to complete the
installation as the dryer can be heavy.
The wall mounting kit includes:
Description
Hanging brackets
Plastic spacers
Exhaust connector
12 mm long screws
25 mm long screws
Tools required:
• one drill and 3 mm bit
• one Phillips head screwdriver
• four ɸ12 x 50 mm timber screws
Note:
• A minimum of 50 mm (2 inches) is required
between the top of the dryer and the ceiling.
• If mounting above a washing machine, ensure
there is enough space above the washing
machine to fully open the lid and load or unload
the appliance.
• This dryer is not designed to be placed directly
on top of a washing machine or any other
appliance.
Important: If you wish to install the dryer with a
stacking kit, we strongly recommend only using
the Danby Dryer with the Danby Laundry Stacking
Kit and ensure that you follow all installation
instructions that come with the Laundry Stacking Kit.
5
Image Quantity
2
2
1
4
4