Information On The Operating Instructions; Intended Use; Representation And Layout Of Warning Instructions; Initial Operation - HellermannTyton HDT16 Manuel D'utilisation

Information on the operating instructions

1 Information on the operating instructions
These operating instructions apply for HDT16 application tool only. Please read these operating
instructions carefully and ensure that they are understood by any persons using the application
tool.
Within this document you will find images illustrating best practice guidelines for operating and
maintaining the application tool, along with contact details for your local HellermannTyton country
representative.

2 Intended use

The HDT16 application tool is intended for the application of stainless steel cable ties.
The use of unsuitable cable ties (e.g., made of plastic) and modifying the application tool is not the
intended use.
We are not liable for any damage and claims arising from the improper operation or use of the
cable tie installation tool, nor are we responsible for any damages caused by defects resulting from
inappropriate or unsuitable use of the tool, incorrect or careless treatment, normal wear and tear
as well as any modifications made to the tool by the customer of a third party.
The warranty/repair by HellermannTyton does not include the rectification of faults that results
from force majeure, external influences, customer neglect (e.g., modifications or attachments,
application errors etc.) or the influence of third parties. The replacement of wear parts or spare
parts during or after maintenance work carried out according to the operating instructions is also
not included.
The application tool must only be operated when in a technically sound condition.

3 Representation and layout of warning instructions

The hazard level with the associated warning symbol and explanation are illustrated below:
CAUTION
Possible slight injuries.
NOTE
Texts with this symbol indicate situations that can lead to damage to the tool if not observed.

4 Initial operation

The application tool can be used immediately.
f Take the application tool out of the packaging and check it for damage. If damaged, inform the
supplier in writing immediately.
4
Operating instructions • HDT16 • 02-2016 • 110-40000