Abus FUMK50000W/B Instructions D'installation Et D'utilisation page 13

INCERT no.
Housing material
Wireless
power
Normen
3. Implementation
Attaching the detector:
 Do not attach on or near metal surfaces!
 Do not attach within 1 metre of gas, water or
 Do not attach near electronic devices (e.g. com-
Select an installation location which is within the wireless range
of the alarm panel or repeater.
Range
The range is dependent on the surrounding conditions.
The signal strength should not fall below 4. Testing using the
Secvest: Installer menu  Test  Detector signal
Installation location
The best place to install the wireless opening detector is the up-
per corner of the window/door frame. Ensure that the detector is
installed on a flat surface so the removal wall contact switches
correctly
transmission
power lines!
puters, photocopiers or other detectors)!
C-019-0430
ABS
Max. 10mW
EN 50131-2-6
E N | 13