Fakir BT 200 Mode D'emploi page 22

After steam ironing using the blowing function, it is advisable to start the suction function
for a short while to remove humidity and heat from the ironing board cover. To do this you
will need to steam the iron in the air or over a sink.
When you release the steam button the suction or blowing stops too.
22
Steam ironing
The steam button also has a continuous steam mode.
With light pressure holding the button down, steam and
suction or blowing functions are activated. Releasing the
button deactivates these functions.
To use the continuous steam mode push the steam button
further down, the button is locked in the continuous mode.
Use a light touch to unlock the button and the functions
are deactivated.
You can steam iron and refresh hanging garments too.
Hold the iron vertically; with delicate, synthetic or velvet
fabrics, it is better to keep a distance of some centimetres
from the garment.
Cotton and linen garments can be ironed placing the iron
directly on to the fabrics.
Ironing on the air pillow, pullovers and wool garments
swell. We recommend that you do not place the iron direc-
tly on to the material. This way, it is possible to iron even
very delicate fibres.