Rotatable Sitting Parts; Cleaning And Maintenance - lopital Lotus Mode D'emploi

3.3. Rotatable sitting parts

The Lotus is equipped with 2 comfortable sitting parts that can be rotated away. Rotate
both parts away before rolling the Lotus towards the client (See figure 3). Have the client
stand on the Lotus. Ensure that he / she positions his / her legs in the centre of the
footplate and that the shins rest against the lower leg support. Now the client can pull
himself / herself up. Now, rotate the sitting parts back, thus enabling the client to sit
down (See figure 4).
Figure 3 Sitting parts rotated Figure 4 Sitting parts.
away.

4. Cleaning and maintenance

The Lotus must be cleaned daily, with water and regular household cleaning agents.
Remove excess soap residues. PUR integrated foam components with IMC coating should
be rubbed clean and disinfected. Do not use any abrasive or other aggressive cleaning
products (e.g. chlorine bleach). Practical experience has shown that regular household
cleaning agents with limited alcohol content (max. 5%) are most suitable for this
purpose. The product Neoquat combi is recommended for disinfection purposes
®
(on the basis of long-term testing). If necessary, the PUR components can be cleaned
with a solution of 70% ethanol or propanol.
You must ensure that both the disinfecting and cleaning processes involve the
components being rubbed and not just submerged. The time the products must be left
on the components has a significant impact upon the lifespan of the PUR components.
As a result of the material properties of PUR, contact with sharp objects must be
avoided. This could lead to damage or tears in the material. Finally, we would like
to point out that non-critical parts of the PUR components must also be cleaned and
decontaminated.
22 | Instructions for use | Lotus Active standup aid