Inserting A Disk; Removing A Disk - Sony External HiFD Drive Mode D'emploi

Operation

Inserting a disk

Removing a disk

18
Insert a HiFD/Floppy disk into the drive.
Before a floppy disk may be used, it must be formatted.
Commercially available pre-formatted 200 MB HiFD or 1.44
MB DOS disks do not need to be reformatted.
See Usable Floppy Disks on page 19 for compatibility details.
Confirm BUSY indicator is not lit and press EJECT button.
Should disk not eject after pressing EJECT, contact Hotline
Support listed at the end of this manual.
BUSY
Indicator
EJECT
Button