Accessories; Removing The Rechargeable Shaver Battery - Philips AT900 Série Mode D'emploi

ENgLIsh
14

Accessories

To retain the top performance of your shaver, make sure you clean it
regularly and replace its shaving heads at the recommended time.
shaving heads
- We advise you to replace your shaving heads every two years. Always
replace with HQ9 Philips Shaving Heads (for AT940) or HQ8 Philips
Shaving Heads (for AT893/AT891/AT890/AT754/AT753/AT752/AT751/
AT750).
cleaning
- Use Cleaning spray (HQ110) to clean the shaving heads thoroughly.
Environment
- Do not throw away the appliance with the normal household waste at
the end of their life, but hand them in at an official collection point for
recycling. By doing this, you help to preserve the environment.
- The built-in rechargeable shaver battery contains substances that
may pollute the environment. Always remove the battery before you
discard or hand in the shaver at an official collection point. Dispose
of the battery at an official collection point for batteries. If you have
trouble removing the battery, you can also take the appliance to a
Philips service centre. The staff of this centre will remove the battery
for you and will dispose of it in an environmentally safe way.

removing the rechargeable shaver battery

Only remove the rechargeable battery when you discard the shaver.
Make sure the rechargeable battery is completely empty when you
remove it.
1 Disconnect the shaver from the mains.
2 Let the shaver run until it stops.
3 Undo the screws in the back of the shaver and in the hair chamber.
4 Remove the front panel and the back panel.
5 Bend the 6 hooks aside and take out the power unit.
Be careful, the hooks are sharp.
6 Remove the battery.
Be careful, the battery strips are sharp.