Table des Matières
Publicité
Section 3
Fonctionnement
Fonctionnement
Setpoints
tS = Temperature setpoint
diF = Differential
CSH = Maximum compressor starts/stops
dPd = Defrost per day
tod = time of day (only used when custom defrost is
selected)
dFt = Defrost time
HAO = High Alarm Offset
LAO = Low Alarm Offset
tAd =Temperature Alarm Delay
Adr = Mod Bus Address
Unt = Ynits for temperature display (FAH or CEL)
27
Publicité
Table des Matières
