AudioSonic CL-1482 Mode D'emploi page 3

Action (during data adjustment):
Press |<< / TEMP / °C / °F button (6) to adjust data backward
-
Press >>| / Y-M-D / DST button (2) to adjust data backward
-
Keep depress |<< or >>| button for 2 seconds to enable auto forward.
-
2. SETTING ALARM OUTPUT AND ALARM ON/OFF
A. Change the alarm output
Press AL 1 (7) / AL 2 (8) button to Music
position to select wake up by Buzzer, set to Alarm off position to disable all alarm.
Select the Display Auto Off / Low / High dimmer switch (12) to the Auto off Mode. Alarm wake up the
time display is auto turn on.
3. ALARM DURATION AND SNOOZE FUNCTION
Alarm Duration – Buzzer alarm or radio alarm will continue output for 30 minutes if no key press, then
it will stop automatically and wait for same alarm time on next day.
Action for Snooze:
During alarming, press Snooze / Sleep button (3) will enable snooze function, Buzzer alarm or Radio
-
alarm will stop.
Snooze interval is 9 minute (not include second offset)
-
Snooze will continue unless press On / Off button (5) to alarm off of Buzzer alarm or Radio alarm stop
-
automatically after 30 minutes.
Select the Display Auto Off / Low / High dimmer switch (12) to the auto off mode. During alarming
-
display auto turn on. Press Snooze / Sleep button (3) will enable snooze function, buzzer alarm or
radio / display will stop & off.
4. CHANGE DISPLAY CONTENT
A. Press >>| / Y-M-D / DST button (2) during normal can switch to display YEAR / MONTH / DAY, after
5 seconds timeout and return back to display time.
B. Press |<< / TEMP / °C / °F button (6) during normal can switch to display in door temperature, after
5 second timeout and return back to display time.
C. Press |<< / TEMP / °C / °F button during normal can switch to display in door temperature and hold
for 3 seconds change temperature unit °C / °F
5. SLEEP FUNCTION
During radio on mode, press Snooze / Sleep button (3) to turn on Sleep mode, the sleep time will keep
flashing by 5 second, within 5 seconds and press Sleep button can change the duration from 90 min –
15 min. Press On/Off button (5) to cancel sleep function.
DST – Daylight saving time
Press >>| / Y-M-D / DST button and hold for 3 seconds to toggle on and off DST function. (For one hour
summer & winter time difference)
RADIO OPERATION
Press the On / Off button (5) to turn radio on.
-
Select AM/FM band press the AM/FM band button (1).
-
Select the station using the Tune knob (19).
-
Turn the volume knob (18) to adjust volume as required.
-
Press the On / Off button (5) to turn radio off.
-
Note:
The AM band use an internal directional aerial, rotate the radio for best reception.
-
Ensure that the FM antenna (15) is completely unrolled and extended for best FM reception.
-
RESET
The reset button (11) is located on the back of unit. Use a ballpoint pen to press it whenever you
-
change the batteries, or unit is not performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).
position to select wake up by Radio, set to Buzzer