Assembling; To Assemble The Hand Blender; Assembling The Wire Whisk; Assembling The Liquidiser - SilverCrest SSMS 600 C3 Mode D'emploi

Assembling

To assemble the hand blender

GB

Assembling the wire whisk

Assembling the liquidiser

62
WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the first use, clean all parts as described in the chapter "Cleaning".
WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care.
■ Place the hand blender
the symbol . Turn the hand blender
points to the symbol
■ Insert the whisk into the whisk holder
■ Place the so assembled whisk
points to the symbol
symbol .
WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care.
■ Carefully place the blade
Turn the blade a little until it slides onto the holder.
NOTICE
► The blade is not fixed firmly in the holder. This is normal. The blade
is only sits firmly when the bowl lid
■ Fill the bowl with the foodstuffs you wish to liquidise
on the motor unit
until the arrow on the motor unit
.
.
onto the motor block
Turn the motor block
onto its retainer in the bowl
is put on.
so that the arrow points to
so that the arrow
until the arrow points at the
.
.
SSMS 600 C3