Maintenance; Maintenace Plan - HOLZMANN MASCHINEN HOB 260NL Notice D'emploi

15

MAINTENANCE

Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all
connecting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
15.1

Maintenace plan

After each workshift:
Components
Machine complete
Blade shaft
Safety devices
HOLZMANN MASCHINEN GmbH
A T T E N T I O N
N O T I C E
Remove all swarfs and dust from machine, especially from planer

and thicknessing tables
Check the blades of wear and change if it necessary

Check covers for damage and tight fit

Check limit switch for safety shutdown and adjust if necessary

Check function of emergency switch

www.holzmann-maschinen.at
MAINTENANCE
To do
49
HOB 260NL