Safety; Intended Use - HOLZMANN MASCHINEN HOB 260NL Notice D'emploi

Masquer les pouces Voir aussi pour HOB 260NL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

12

SAFETY

12.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Planing and thicknessing of timber
Any manipulation of the machine or its parts is a misuse, in this case
MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect
damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
The operation of the machine outside the stated technical limits described in this
manual is forbidden.
Operation of the machine function without emergency stop button or guard devices
is prohibited.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this user-manual
is forbidden.
The unattended operation on the machine during the working process is forbidden!
It is not allowed to leave the immediate work area during the work is being
performed.
HOLZMANN MASCHINEN GmbH
Use only blades allowable for this machine!
Never use damaged blades!
Never use the machine with defective or without mounted guard!
The removal or modification of the safety components may result in
damage to equipment and serious injury!
www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
HOLZMANN-
35
HOB 260NL

Publicité

Table des Matières
loading

Table des Matières