VAPamore MR-500 VENTO Mode D'emploi Et Manuel De L'utilisateur page 6

ASSEMBLING THE MR-500 VENTO
GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
switch operated electric rotating brush to be used for carpets and rugs plus a non electric
the non electric extension pole or directly with the hose handle.
Fig.1
Fig.2
Push down
to lock in
place
Release
button
Fig.3
Push down
to lock in
place
Release
petal
Fig.4
Fig.5
Non electric
Hose handle
pole
e
VACUUM HOSE AND HANDLE
Push down
to lock in
With the hose pointed towards the rear of the vacuum, push
place
its locked into place. To remove the connector push in the
Release
release buttons located on both sides of the connector and
buttons
on sides
pull up to release. NOTE: The hose contains electrical wires
and should not be used if damaged or if wires are exposed in
any way through the outer shielding. Fig.1
ELECTRIC EXTENSION POLE AND FLOOR HEAD
Attached the hose handle into the electric extension pole by
Push up
or down
to extend
or collapse
locked into place. To remove the handle push in the release
button and pull upward. To extend or collapse the extension
pole, push downward or pull upward as directed by the
arrows on the extension handle. Fig. 2
pull up on the electric extension pole to release. Fig. 3
NON ELECTRIC EXTENSION POLE, FLOOR HEAD AND TOOLS
Push down
until snug
Attached the hose handle into the non electric extension pole
e
push button
to extend or
to extend and collapse the extension pole . Fig. 4
collapse pole
used with the non electric extension pole or directly to the
hose handle.
tools are attached in the same manner by pushing the non
Push all
tools down
to lock in
place
of the vacuum to rotate the internal brush. Fig. 5
e
e
e
e