Maintenance And Storage; Hepa Filter - VAPamore MR-500 VENTO Mode D'emploi Et Manuel De L'utilisateur

MAINTENANCE AND STORAGE

GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
MAINTENANCE
Besides regularly changing the dust collection bag as covered earlier under "Using your
MR-500 Vento" there are other maintenance items that must be done to ensure maximum
performance and life of your vacuum. These include cleaning or replacing the vacuum
Fig. 23
Fig. 24
Fig. 25
cover release
Fig. 26
Low suction
can be due to
blockage
VACUUM MOTOR FILTER
compartment. It protects the motor from dirt particles.
or by calling Vapamore at 480-951-8900. Do not operate
grill cover
void the motor warranty. Fig. 23-24

HEPA FILTER

grill cover
replace cover. Fig. 25
BLOCKAGE
Low suction or poor pick up can be due to a blockage or
heads or tools. Check each part until the blockage or
restriction is found and cleared.
With the vacuum on check the hose handle inlet for
proper suction. If suction is low at the handle inlet,
clear the restriction in the hose handle, hose, hose socket,
release tabs
suction is 100% at the hose handle inlet then the
blockage or restriction could be located in the extension
blockage or restriction. Fig. 26
Contact Vapamore at 480-951-8900 or
info@vapamore.com for any technical questions, user
information or service issues.
e
ALWAYS DISCONNECT THE VACUUM FROM THE
ELECTRICAL OUTLET BEFORE ANY SERVICE OR
MAINTENANCE WORK.
e