Cleaning And Maintenance - Jimmy B53 Mode D'emploi

Notes:
1. Be sure to cover the blending jar tightly during stirring (except by inserting the pusher through the
opening of the lid or by adding ingredients).
2. Do not put anything into the jar while the machine is running.
3. Do not remove the jar before the machine stops moving completely. Remove the jar or lid from the
machine after the blade stops rotating completely.
4. Please unplug the machine after use.
Accessories Using Instructions
Pusher: When auxiliary crushing is needed, remove the inner cap and extend the pusher
through the hole in the center of the lid for auxiliary crushing.
Notes:
1. Do not open the lid directly to use the pusher when machine is running.
2. Do not use a pusher that does not match this product.
3. The pusher cannot touch the blade in any case.

Cleaning and Maintenance

Cleaning of Blending Jar
For your safety and health, please follow the following steps when using the machine for the
first time
Fill the jar with half the water and add a few drops of detergent. Lock the outer lid and the
inner cap tightly. Rotate the knob and select function, start the machine. Turn off the
machine until it stops spinning and pour the liquid out of the jar, flush the jar under flowing
tap.
Notes: When cleaning, do not touch the blade directly with your hands, in case the blade cuts
your fingers. You can also use tools to assist in cleaning.
Cleaning of Inner Cap, Outer Lid, Pusher and Gasket Ring
Separate the inner cap, outer lid, blade assembly and gasket ring. Wash them and the pusher
with detergent in warm water, and then rinse them with flowing water and dry them. Please
reinstall before using.
Cleaning of Main Machine
Unplug before cleaning.
Soak a piece of soft cloth or sponge with the mixture of detergent and warm water, then clean
the outer surface of the main machine with the soft cloth or sponge. Do not put the main
machine directly in water to wash or rinse directly with water.
Thoroughly clean the panel, speed control knob to ensure its flexible operation. If any liquid or
sticky substance sticks to the surface of the main machine during operation, please remove it
immediately.
Use soft cloth to wipe, so as not to scratch the appearance of the host. Do not use corrosive
detergent or liquid to clean, and wait for the main machine to dry thoroughly before storage.
4