Cleaning And Maintenance - Jimmy B32 Mode D'emploi

4.Rotate the speed control knob the machine will start. You can adjust the rotation speed by
switching between level "1"and level "2". (Figure 6)
Notes: Do not open the outer lid of the blending jar during stirring. Be sure to cover the inner cap tightly.
5.After the food material processing is completed, rotate the speed control knob to level"0" to
stop the operation.
Notes: Please wait until the blade stops completely before removing the blending jar or lid from the machine
(you can gently push the protruding edge of the lid above the blending jar mouth to open the lid).
6.Unplug the machine when it stops running.
Notes:
1. If the smoothie is to be made separately and there is no liquid in the jar, put no more than 10 ice cubes into the jar
(the ice cube's size is about 2.5cm×2.5cm×2.5cm). You can switch between "level 0" and "level 1" several times for
better effect.
2. The continuous working time of the machine is not allowed to exceed 90 seconds. If the food material is still not
stirred well after 90 seconds, please turn off the power and continue to use after a rest of 3 minutes.
3. Do not add more than 900mL of food material in the jar, as overload will affect the lifetime of the machine.
4. During the operation of the product, do not open the lid or rotate to remove the jar. If you need to add fruits,
vegetables or other food, please turn off the power and add ingredients after the blade stops completely.
5. Do not add more than 200g of dry ingredients for grinding, otherwise the machine will be damaged.

Cleaning and Maintenance

Cleaning of Blending Jar
For your safety and health, please follow the following steps when using the machine for the first
time.
1.Fill the jar with half the water and add a few drops of detergent. (Figure 7)
2.Lock the outer lid and the inner cap tightly.(Figure 8)
3.Rotate the speed control knob to "Pulse" (Figure 9) and the cleaning starts.
4.Turn off the machine until it stops spinning
and pour the liquid out of the jar.
Notes: When cleaning, do not touch the blade directly
with your hands, in case the blade cuts your fingers.
You can also use tools to assist in cleaning.
Cleaning of Inner Cap, Outer Lid,
Blade Assembly and Gasket Ring
Notes: The blending jar and the blade assembly
can be disassembled. First hold the jar body with
one hand, and then rotate the blade assembly
counterclockwise to open it for further cleaning.(Figure
10)
Separate the inner cap, outer lid, blade
assembly and gasket ring. Wash them with
4
7
Half a jar of
warm water
9
8
Outer lid
Inner cap
10
Jar
Blade
assembly