Use Of Product; Control Panel; Operation Steps - Jimmy B53 Mode D'emploi

Use of Product

Control Panel

Display Panel:
Displaying time, speed and function status.
(Figure 1)
Function Selection Knob Button:
Selecting functions (
and press the button to run the program shown
in the current "function".
Choose a level (1,2,3,4,5,6) you need by
rotating the knob button and press it, the
machine will start the program shown in the
current "level". (Figure 2)
Select the function or level by rotating the
knob button, start the machine by pressing the
knob button, turn off the machine by pressing
the knob button again. (Figure 2)

Operation Steps

Only when all parts of this product are installed
correctly can they be used normally.
1. Put the food to be stirred into the jar, and
cover the jar with the outer lid and inner cap.
(Figure 3)
2. Rotate the inner cap according to the label
until a "click" sound is heard. (Figure 4)
3. Place the blending jar on the main machine.
(Figure 5)
4. Rotate the knob to select the needed
function, press the function knob button, and
the blender starts to work. (Figure 6)
5. After processing, the machine will stop
running automatically.
Notes:
1. The ingredients should not exceed the maximum
scale of the jar.
2. Please unplug the machine after use.
Operation Instruction
Six function programs are displayed on the left side of the function panel (
). When selecting one of the functions, the screen will display the corresponding program
time countdown. 7 levels from 0 to 6 are displayed on the right side of the function panel.
When selecting one of the levels, press the knob button, and the display starts timing.
, , , , ,
1
Display area
Time
),
2
Function selection knob button
3
5
Speed
Function panel
4
Outer lid
Inner cap
6
Function selection knob button
, , , , ,
3