Sound Levels - Husqvarna DM 540i Manuel D'utilisation

Speed spindle, no load E-gear 1, rpm
Speed spindle, no load E-gear 2, rpm
Drill diameter in concrete, mm/in.
Dust and slurry
Drill bit diameter to use a slurry ring, mm/inch

Sound levels

WARNING:
value has been measured in accordance
with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value may also
1
Noise emission
Sound pressure level, measured dB (A)
Sound power level, L
WA
Vibration levels when drilling into concrete, a
2
Main handle, m/s
2
Auxiliary handle, m/s
Embedded connectivity
Note:
This part is applicable only for products
supplied with embedded connectivity.
BLE technology radio spectrum
Frequency bands for the tool, GHz
Maximum radio-frequency power transmitted, dBm/mW
1
The noise emission are measured in accordance with EN 62841-2-1.
• Uncertainty for the A-weighted sound pressure level K
• Uncertainty for the A-weighted sound power level K
2
Vibration level according to EN 62841-2-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,5 m/s
22
Declared vibration total
dB (A)
h,DD
2
770
1400
50-100/2-4
2
is 5 dB(A).
pA
is 5 dB(A).
pA
15-50/1/2-2
25-100/ 1-4
be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission
during actual use of the power tool can differ
from the declared total value depending on
the ways in which the tool is used. Also the
need to identify safety measures to protect
the operator that are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating).
2.402-2.480
4/2.5
1567 - 001 - 21.06.2021
2400
4450
86
97
2.76
1.90