About The Bluetooth Wireless Technology; Playing Back With High Quality Sound Codec (Aac/Ldac™) - Sony GTK-PG10 Mode D'emploi

Switching between BLUETOOTH
devices connected to the system
at the same time (Multi-device
Connection)
Up to 3 BLUETOOTH devices can be
connected to the system at the same
time.
While playing back an audio source
from one of the connected devices,
you can switch the BLUETOOTH
input device by operating another
connected device to start playback.
Note
Depending on the BLUETOOTH devices,
you may not be able to make 3 BLUETOOTH
connections at the same time.
About the BLUETOOTH
wireless technology
BLUETOOTH wireless technology is a
short-range wireless technology that
enables wireless data communication
between digital devices. BLUETOOTH
wireless technology operates within a
range of about 10 m.
Supported BLUETOOTH version,
profiles and codecs
For details, see "BLUETOOTH section"
(page 32).
(BLUETOOTH) indicator
The (BLUETOOTH) indicator on the
unit lights up or flashes in blue to
show the BLUETOOTH status.
System status
BLUETOOTH
standby
BLUETOOTH
pairing
BLUETOOTH
connection is
established
Indicator status
Flashing slowly
Flashing quickly
Lit up
Playing back with high
quality sound codec
(AAC/LDAC™)
This system can receive data in the
AAC or LDAC codec format from a
BLUETOOTH device. It provides a
playback with higher sound quality.
You can select an audio codec option
from the following two settings
by using "Sony | Music Center"
(page 21). The default setting of
this system is "AUTO."
• AUTO: The system detects the codec
used on the source device and
automatically selects the optimal
codec from "SBC," "AAC*" or "LDAC*."
• SBC: "SBC" is always applied
regardless of the codec used on the
source device.
* Available only when the codec is
supported by your BLUETOOTH device.
To apply the changes of the setting,
you need to terminate the BLUETOOTH
connection (page 17), and then
perform the BLUETOOTH connection
again.
Note
You can enjoy higher sound quality
when the source device is compatible
with AAC/LDAC and this function is set
to "AUTO." However, the sound may be
interrupted depending on the conditions
of the BLUETOOTH communication. If this
happens, set the function to "SBC."
19
GB