Connecting The Ac Power Cords (Mains Leads); Setting Up The Wireless System - Sony WAHT-SA1 Mode D'emploi

Connecting the AC Power Cords (Mains Leads)

Before connecting the AC power cords (mains leads) of your S-AIR main unit and the surround
amplifier to wall outlets (mains), make sure that all speakers are connected.

Setting up the Wireless System

To use the wireless system, you need to set
up the surround amplifier and your S-AIR
main unit. Before setting, make sure that the
wireless adapters are correctly inserted in
the S-AIR main unit and surround amplifier.
Front panel
POWER / ON LINE
Indicator
POWER/ON LINE
PHONES jack
Rear panel
EZW-RT
S-AIR ID
SURROUND SELECTOR
SURROUND
SELECTOR switch
POWER
POWER
PHONES
S-AIR ID switch
10
SPEAKER
A
B
C
L
PAIRING
R
SURROUND
SURROUND
BACK
ID setting
By matching the ID of the surround
amplifier and your S-AIR main unit, you
can establish sound transmission. You can
also use multiple S-AIR products by setting
a different ID for each product.
Setting up the S-AIR main
unit
1
Turn on the S-AIR main unit.
The system turns on.
2
Set up the S-AIR main unit so it is
ready for ID setting.
3
Select the ID for the S-AIR main
unit.
You can select any ID (A, B, or C).
For details, refer to the operating
instructions of the S-AIR main unit.
Setting up the surround
amplifier
1
Set the SURROUND SELECTOR
switch (SURROUND or
SURROUND BACK) of the
surround amplifier to match the
S-AIR main unit.
2
Set the S-AIR ID switch of the
surround amplifier to match the
ID (A, B, or C) of the S-AIR main
unit.
7
GB