Maintenance - Toshiba RAS-M10SMUV-E Manuel D'installation

Masquer les pouces Voir aussi pour RAS-M10SMUV-E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29

12 MAINTENANCE

Prior to maintenance, ensure the power supply is turned off.
WARNING
Cleaning of the air filter and other parts of the air filter involves dangerous work in high places, so be sure to have a qualified
service person do it. Do not attempt it yourself.
CAUTION
Do not handle the buttons with wet hands as this will cause the risk of electric shock.
Cleaning of air filter
Clean the air filters every 3 months. The performance of the air conditioner will degrade if
the air filters are covered with dust. Clean the air filters as often as possible.
1
Open the air inlet grille.
• Slide the air inlet grille buttons to detach the air inlet grille from the main ceiling
panel. Lower the grille slowly whilst holding.
2
Take out the air filter.
• Push the extrusion of the air filter away from the grille and remove.
3
Cleaning with water or vacuum cleaner
• If dirt is heavy, clean the air filter using tepid water with a neutral detergent or just
water.
• After cleaning with water, dry the air filter sufficiently in a shaded place.
4
Mount the air filter.
5
Close the air inlet grille.
• Close the air inlet grille, slide the button to locate into the ceiling panel fixing
securely.
Cleaning of air outlet louver
The air outlet louver can be removed to clean if necessary.
1
Remove the air outlet louver.
• Holding both ends of the air outlet louver, remove it by sagging the center
downwards.
2
Clean the air outlet louver with water.
• If dirt is heavy, clean the air outlet louver using tepid water with neutral detergent
or just water.
3
Mount the air outlet louver.
• First push in the one side, and insert the opposite side by sagging the center
downwards.
Be careful to insert the louver in the correct direction.
Insert the louver with the printed mark facing upwards, and the arrow on the louver
pointing in the outward direction.
EN
24
Air inlet grille
Button
Strap to
prevent falling
Air filter
Air inlet grille
Button
b Insert in the louver sagging down
the center downward.
a Insert
Push

Publicité

Table des Matières
loading

Table des Matières