System Settings - Fysic FX-8025 Mode D'emploi

10 SYSTEM SETTINGS

10.1 INTRODUCTION:
The system settings are the settings regarding the gen-
the wired telephone of wireless handset. You can use
the wired telephone or wireless handset to fully custom-
ize these settings according to your preferences.
10.2 TIME AND DATE:
In standby, the display of the telephone and handset
shows the time and date. In case of Caller-ID service and
when recording messages in the answering machine, the
time and day of the call are registered. You only need to
program the time and date in the telephone or in the hand-
set once.
Attention: when connected to a switchboard sending
Caller-ID with FSK signals, you'll receive the time and date
from that switchboard by simply waiting for a while until you
receive an incoming call.
SEE FOLD-
OUT PAGE
select the option:
press the OK button and use
the and
correct year. Now repeat this
instruction for the following:
the month, the date, the hours
and the minutes
press the OK button; after a
tone, your settings are saved
182
DATE & TIME
buttons to set the