Caller Identification - Fysic FX-8025 Mode D'emploi

7

CALLER IDENTIFICATION

7.1 INTRODUCTION:
disposal, the number of the calling party is dis-
played on the display of your handset(s). You have
programmed this number including name and the
phone book memory of the handset, the name is
also displayed on the display.
7.2 NEW CALL INDICATION:
The word NEW will appear in the display when the
memory contains calls you haven't seen yet. Follow-
ing the word NEW, the number of new calls you've
received since the last time you checked the memory
is shown.
7.3 CHECKING THE MEMORY:
repeatedly press the
buttons to scroll the Caller-ID
memory
* in the upper right corner, after #, the
number of this call is shown
* in the middle upper part of the display,
the time and date of the call are shown
* if the word RPT appears while
checking the memories, it means that
this subscriber has called you multiple
times since the last time you checked
the memory (this indication only ap-
pears when the selected call a new
call is, i.e. not yet read)
press the End button to leave
the memory reading mode
168
and