Control Panel & Features - Whirlpool WED4900XW0 Guide D'utilisation Et D'entretien

CONTROL PANEL & FEATURES
1
Tumble
Damp
Press
20
Dry
Cool Down
40
TIMED
DRY
50
OFF
60
70
Heavy
Dry
OFF
WP_WEGD4900XW
OFF
WRINKLE
SHIELD
1
Heavy
Dry
TIMED
70
OFF
60
50
WRINKLE
SHIELD
Cool
Down
Less Dry
ENERGY
PREFERRED
WP_WEGD4800XQ WP_WEGD4800XQ
Very Dry
30
AUTOMATIC
20
OFF
DRY
10
FLUFF AIR
1 DRYER CYCLE KNOB
Use your Dryer Cycle Knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
ACCUDRY™/AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting.
2
TEMPERATURE / FABRIC
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
NOTE: The Air Only temperature setting (on some models)
is not available on ACCUDRY™ cycles.
ACCUDRY
sensor dryer
Jeans
Very Dry
ENERGY PREFERRED
Delicate
Less Dry
Cool Down
DRY
40
Damp Dry
Tumble Press
30
Cool Down
OFF
Not all features and options are available on all models.
TEMPERATURE
Appearance may vary.
WRINKLE SHIELD™ Feature (on some models)
3
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD™ feature periodically tumbles, rearranges, and
fluffs the load to help keep wrinkles from forming.
Get up to 40 minutes of heat-free, periodic tumbling at
n
the end of a cycle. Turn the WRINKLE SHIELD™ knob to
ON or OFF at any time before the cycle has ended.
4
END OF CYCLE SIGNAL/PUSH TO START
The End of Cycle Signal produces an audible sound when
the drying cycle is finished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the
desired setting (On or Off). Press the PUSH to START knob
to start the dryer.
NOTE: When the Wrinkle Shield™ setting is selected
and the End of Cycle Signal is on, the tone will sound every
5 minutes until the clothes are removed, or the Wrinkle
Shield™ setting ends.
2 3
WRINKLE SHIELD
fabric
2
TEMPERATURE
fabric
4
PUSH TO START
4
PUSH TO START
5