Loading The Laundry - Electrolux EWF 1408 WDL2 Notice D'utilisation

16 www.electrolux.com
• The related programme indicator
comes on.
• The display shows all information
about washing programme.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options.
When you activate an option, the
indicator of the set option comes on.
If you set something
incorrect, the display shows
that the selection is not
possible.

10.4 Loading the laundry

1. Open the appliance door.
The display shows the weight of the
laundry
programme load
tells to add the laundry.
2. Put the laundry in the drum, one item
at a time. Shake the items before you
put them in the appliance.
On the display, the weight of the laundry
updates by steps of kg 0,5. The weight is
a general indication that changes with
the type of the laundry.
In the programmes with the
maximum declared load, if
you put too much laundry,
the text bar tells that the load
is completed. In the other
programmes, the MAX
indicator flashes and the text
bar tells that the maximum
load is exceeded. To have
the best consumption and
performance remove some
items.
3. Close the door firmly.
The text bar shows the quantity of
detergent to use. If you have set the "Set
10.6 Detergent compartments
CAUTION!
Use only specified detergents for washing machine.
and the maximum
. The text bar
dosage det 1" and "Set dosage det 2",
the display gives the alternative between
two types of detergent.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
10.5 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Put the detergent and the fabric
conditioner into the compartments.
3. Carefully close the detergent drawer