Beko Bekomat 21 Instructions De Montage Et De Service page 8

Installation • Instalación
Installation • Instalação
wrong • no correcto
incorrect • incorrecto
Electrical installation • Instalación eléctrica
Installation électrique • Instalação elétrica
3
2
6
5
8
correct • correcto
correct • correcto
4
8
7
1
english
Note: Continuous slope
It is important to avoid water pockets
when using a pressure hose as a feed
line!
Note: Continuous slope!
Water pockets must also be avoided
when laying a feed pipe.
english
BEKOMAT 21
Note before wiring:
• Check type plate (1) for permis-
sible mains voltage and ensure
conformity!
• Please ensure that the installation
is carried out according to the
valid regulations.
• Please assign terminals as
indicated!
• Remove screws (3) and lift off hous-
ing top (2)
• Unscrew cable fitting (7), remove
blanking disk (8) and guide 3-core
cable for power supply (4) through
cable fitting.
• Join cable to terminal connector (5)
(The terminal connector can be pul-
led off.)
Terminal assignment
L = phase conductor (black) , N = neu-
tral conductor (blue), PE = protective
conductor (green&yellow)
• Plug terminal connector (5) to con-
trol PCB (6)
• Pull cable (4) tight and screw down
cable fitting (7)
• Put back housing top and tighten
screws (3)
BEKOMAT 21, 21 PRO